Dining Chair Foam Replacement
Repairing, upgrading, or even constructing your own dining room chairs can be a real money-saver and yield professional-looking (and feeling) results.
Obviously the purpose of a dining room chair is to provide support and comfort while you're eating and socializing, which could potentially be for hours at a time.
Unfortunately, some chairs just aren't manufactured to a good enough standard in these departments.
Luckily, there is plenty of upholstery foam available on the market for chair reconstructions.
But when you're buying online, it can be difficult to tell high-quality foam from cheaper products which is where this post comes in.
The Best Choice Foam For Dining Room Chairs
BEST VALUE
Linenspa High-Density Cushion Craft Foam
Linenspa has been manufacturing high-quality mattress padding for years and is a Centipur-certified U.S. manufacturer.
The company's reputation and certification makes it a reputable company that you can trust your home comfort to.
This High-Density Cushion Craft Foam is a multipurpose foam that comes in an array of size and density options.
From sofas to car seats, there's a version of this upholstery foam to meet all your needs, and it's especially good as padding for dining room chairs.
You can purchase this foam in just about any depth you want (within reason) from 1 inch to 6 inches.
The most popular choice, however, is the mid-range 3-inch thickness.
This is thicker than the average dining room chair, but for anyone who likes to minimize pressure around the glute or spinal area, that added thickness can be a real blessing.
Each roll of this foam measures 24 x 72 inches, so you can easily get 3 standard dining room chair seats out of a single layer, with material to spare.
The reason we recommend this foam so highly for dining room chairs is that (in the 'firm' rather than 'extra firm' option), it strikes a great balance between firmness and softness.
With a density rating of 1.6 and a compression rating of 32, you can see that this foam toes the middle line.
The compression is slightly lower than we might like, however, so this is probably not the ideal foam for those looking for a firmer chair seat.
For those who like to sink into their chairs a little, though, it's perfect.
Pros
- Widely available in 3-inch depth
- 24 x 72 inches per purchase
- Mid-range 1.6 density rating
- Centipur-US-certified
Cons
- Compression rating on the low side
Best Foam for Dining Room Chairs Buying Guide
Need some pointers on how to select your perfect dining room chair foam? You're in the right place!
Read on to learn about all the factors you should consider:
Pre-Cut or Cut-to-Size?
Before you even start browsing the available options for dining room chair foam, it's a good idea to have the measurements of your dining room chair seats and backs on hand.
The reason this is so important is that you'll need to make sure you're buying enough foam to cover all the seat areas you need to pad out.
You'll then need to decide whether you want to buy your foam pre-cut or whether you'll do the trimming yourself.
Even when you buy pre-cut squares of foam, you'll probably need to do some trimming to get them to the perfect size, unless there's an option for custom cutting through the manufacturer. However, starting with pre-cut squares can take some of the time and effort out of the process.
If you do opt for pre-cut foam squares, make sure they're large enough to start with. We recommend choosing 20 x 20-inch sizes to make sure they're large enough in all areas.
Back or Seat?
Something else you will need to have thought about before you purchase your foam upholstery is what areas of your dining chairs you want to upholster.
The most common chair areas to pad with foam are, of course, the seat and the backrest, with the seat being the primary concern for most people.
In some cases, armrests may also be padded with foam, although this can usually be done with 'leftovers' from trimming. They may also require a different (often thinner) foam altogether, which is why we're focusing more on seats and backs in this article.
The average dining chair seat measures around 18-20 inches by 15.5-18 inches. The front of the chair seat tends to be wider than the back, but this can vary depending on the design of the chair.
Chair backs are slightly more variable in terms of averages. They can sometimes be significantly taller than the seat but will usually be roughly the same width. Make sure to take these measurements beforehand.
Material
There are several different varieties of upholstery foam on the market for dining room chairs.
Most standard foam products will be made from some type of polyurethane foam.
Unfortunately, it can sometimes be difficult to find material descriptions that are more specific than this, but the good news is that polyurethane in all its forms is a very durable and resilient material.
Gel foam is another great option for those who really want to maximize the comfort they get from their dining room chairs.
While padding made entirely of gel foam can be very expensive, there are foam products on the market that feature a top layer of gel foam for additional comfort and soothing.
Thickness/Depth
This factor leaves a lot of the decision-making down to you, but it's important to carefully think about how thick you want your chair's foam padding to be. This might not sound like a particularly difficult task, but it can easily go awry.
Of course, you don't want to make the mistake of choosing foam that is too thin. After all, you want to experience the full comfort benefit of your new foam upholstery.
Over time (as in, several years), it's likely that your chair foam will begin to flatten out with consistent use, so you want to make sure you have enough padding at the start to allow for this.
On the other hand, installing a piece of foam that is too thick into your dining room chair(s) is likely to result in one of several problems.
Firstly, you may not be able to stretch your original or pre-prepared piece of chair fabric over the bulk of the foam, putting a spanner in the works of your chair reupholstering.
Alternatively, if the foam does fit, you could end up with an overly-cushioned chair that has you bouncing like a jack-in-the-box every time you reach for the potatoes. Okay, that's a pretty extreme example, but you get the idea.
Generally speaking, the ideal thickness for dining room chair foam is about 2 inches. This thickness is usually enough to provide effective support and cushioning, but not so thick as to become impractical. This is why most of the foams on our list of products are 2 inches thick.
However, many people do prefer a little extra padding in their chairs. This could purely be a matter of preference or a question of health.
Sciatica, for example, is a condition that can make sitting down for prolonged periods extremely painful. In cases such as these, a little extra padding can go a long way because it helps to relieve pressure against sensitive areas.
For those who like their chair padding to be thicker than average, we have also included a 3-inch option in our reviewed products.
Disclaimer: If you are dealing with a condition that causes chronic pain when sitting and are buying padding for this purpose, please consult your doctor or physical therapist beforehand. Extra-thick foam alone may not be enough to alleviate symptoms and may not provide the support you need.
Compression/Density Ratings
The compression and density ratings of a piece of foam are just as important as factors like depth.
A foam's compression rating indicates how much weight is needed to reduce the foam's height by 25%. Meanwhile, the density is an indication of how much actual material is contained within a square foot of foam.
You don't want your foam's compression rating or density rating to be either too high or too low. For dining room chairs, we'd recommend a density rating of between 1.6 and 2.4.
A 1.6 density will be suitable for those who like their chairs on the softer side, while higher densities will provide more firmness and support for those who need it. For reference, most dining room chairs use foam at a density of around 1.8.
Where compression ratings are concerned, the ideal rating for you will somewhat depend on how much weight you plan to regularly put on the chair.
However, generally speaking, we recommend a rating no lower than 30, with 40 + being preferable.
How much fabric do I need to upholster a chair?
You'll need around 3 yards of fabric to upholster a dining room chair with higher back and more formal chairs requiring up to 7 yards according to Revolution Fabrics.
Source: https://www.theruggedrooster.com/best-foam-for-dining-room-chairs/
Tidak ada komentar:
Posting Komentar